300W Submersible Aquarium Heater Titanium Fish Tank Auto Thermostat&LED Light US

Description

INKBIRDPLUS 300W Submersible Aquarium Heater - Keep your fish or other pet warm and comfy!
15.55''(L) x 3.15''(W) x 1.77''(H), 1.7M/5.5ft cable
This aquarium heater is simple and beautiful in appearance, placed in your aquarium, unobtrusive, it is essential,
you and your fish will like it and it is made of titanium tube material, which has the performance of anti-breaking, anti-explosion,
anti-cracking, and anti-corrosion. This heating rod can be applied to salt water and fresh water, and the heating effect is better than other materials.
It will turn off automatically when reaches the temperature you set, without overheating.
For the products, we have been keeping improving.
Please tell us if you have any questions or suggestions during use, we value every user’s opinion, and make improvements and upgrades in time.
Note：
If the set value of the 300w aquarium heater is jumping, indicating that it has reached a critical point, and the ambient temperature of your aquarium may have reached a peak,
ot a quality issue, which is a normal phenomenon and needs to be checked for aquarium temperature conditions.
Or we will guide you to check and fix the problem.
Set the Temperature Conveniently
Lightly press the button on the power cord, the LED display flashes and enters the setting mode, and press the switch to set the temperature.
Temperature range: 68-94°F (20-34°C), cycle setting, set to the temperature you need, 5 seconds after release, automatically save the temperature you set,
and restore the real-time water temperature in the fish tank.
Press set for 5 seconds for switching between Fahrenheit and Celsius.
LED Intelligent Indicator Light
Red Light:
Water temperature is a below-set range, heating function will engage and increase temperature automatically.
Blue Light:
When the temperature has reached the set goal, the heater will keep it.
2 Stable Suction Cup Angles
Comes with 2 suction cups.
You can install the aquarium heater vertically and horizontally.
but it must be completely submerged in water when working.
Why Choose Us?
Noiseless
Overheat protection
Intelligent Display
Durable Suction Cups
Easy to Set up
Anti-corrosion Titanium Material
Work well in saltwater and freshwater
Built-in smart IC chip to accurately control the heating temperature
Specifications:
Power: 300 Watt
Voltage: 110V
Suits for Water Volume: 50-60 gallon(189-227L)
Heater length: 15.55, inches diameter: 0.9 inch
Power cord length: 5.5ft
Temperature control range: 68℉-94℉
Waterproof level: IP68
Attention please:
We do not recommend using heaters in acrylic acid or plastic tanks;
The heating tube of the aquarium must be submerged under water;
Before turning on the power, put the heater in the aquarium for 20 minutes to adjust to the water temperature;
To take out the aquarium heater, first disconnect the power supply and wait for 20 minutes, then take it out;
The monitor is not waterproof, please keep it away from water.
E1: Water shortage or the temperature probe on the top of the heater may be blocked by small bubbles
E2: Water temperature over 94℉
E6: Water temperature over 96℉
On Aug 24, 2022 at 20:46:53 PDT, seller added the following information: